Prospects Of Use And Processing Of Titanium Blanks Obtained By xBeam 3D Metal Printing Technology | Technium: Romanian Journal of Applied Sciences and Technology

PDF

Published: Aug 8, 2023

DOI: https://doi.org/10.47577/technium.v12i.9368

Keywords:

Additive Manufacturing (AM), Titan (TI-6Al-4V) machining, xBeam 3d metal printing, Wire and Arc Machining (WAAM)

Dmytro Pirohov

Department of Mechanical Engineering, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

Borys Vorontsov

Department of Mechanical Engineering, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

Abstract

The article presents the new range of additive technologies called xBeam 3D metal printing that allows the production of titanium alloy parts for the medicine, aeronautical and automotive industries. The new technology opens up essential challenges, such as identifying and analysing the optimal finishing machining strategies for this type of part. The article analyses the production and machining of TI6Al4V produced by Wire Arc. The research focuses on implementing optimal cutting modes to obtain the required surface quality. This article provides a better understanding of the machining of titanium blanks using this technology. The optimistic results make this method the best alternative to traditional casting technologies and powder metallurgy.

How to Cite

Pirohov, D., & Vorontsov, B. (2023). Prospects Of Use And Processing Of Titanium Blanks Obtained By xBeam 3D Metal Printing Technology. Technium: Romanian Journal of Applied Sciences and Technology, 12, 53–57. https://doi.org/10.47577/technium.v12i.9368

Issue

Vol. 12 (2023): Applied Sciences and Technology

Section

Articles

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

V.R. Devadath, S. Harish and B. Kidiyoor, "Analysis of additive Manufactured Tibial Spacer Used In Total Knee Replacement Implant", IJERMCE, Vol 2, Issue 4, April 2017, pp. 720-725

D. Kovalchuk, V. Melnyk, I. Melnyk, and B. Tugai, "Prospects of application of gas-discharge electron beam guns in additive manufacturing," Electrotechnical and Electronic (E+E), 5-6/2016, pp. 36–42.

D. Kovalchuk, V. Melnyk, I. Melnyk and B. Tugai “Tekhnolohiia xBeam 3D metal printing na shliakhu do promyslovoho vyrobnytstva”, Suchasna electrometalurgia, 2020, pp. 30-34.

V. Fernando, Alain Gil Del Val, S. Alfredo, and A. Unai, "Analysis of the machining process of titanium Ti6Al-4V parts manufactured by wire arc additive manufacturing (WAAM)", Material,

H. Moaz, A. Ali, A. K. Basim, M. Bashir, "Machining of titanium alloys: a review," Proceedings of the Institution of mechanical engineers part b-journal of engineering manufacture, 2011.

C. Fuchs, C. Fritz, F. Zaeh M., "Impact of wire and arc additively manufactured workpiece geometry on the milling process", Prod. Eng. Res. Devel. 17, 415–424 (2023). https://doi.org/10.1007/s11740-022-01153-8

Similar Articles

Md. Asaduzzaman, A.k.m. Mukibul Hasan, Md Mohsin Patwary, Shakil Mahmud, Md Ariful Islam, Tarek Hossain Raju, Afjal Hossen, Effect of Weave Type Variation on Tensile and Tearing Strength of Woven Fabric , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 2 No. 6 (2020): Proceedings of the 6th Technium Conference 2020
Imam Alfianto, Andi Falih, Abdul Halim, Robot Arm Teleoperative System Design with Flex Sensor , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 2 No. 7 (2020): Proceedings of the 7th Technium Conference 2020
Alavandar Yudhistrakumar, Fire load occupancy of various zones in an pharmaceutical industry , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 3 No. 7 (2021): Sustainable Future and Technology Development
Achadiah Rachmawati, Putu Hadi Setyarini, Mas Ayu Ambayoen, Irfan H. Djunaidi, Siti Azizah, Effect of feed rate and depth of cut on face milling process on surface roughness of Al-Mg alloy using CNC milling machine 3 axis , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 3 No. 11 (2021): Applied Sciences and Technology
Danijela Pezer, Filip Vukas, Marin Butir, Experimental study of tensile strength for 3D printed specimens of HI-PLA polymer material on in-house tensile test machine , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 4 No. 10 (2022): Applied Sciences and Technology
Andrei Dumitrescu, Sentence Completion Test – Research and Inspirational Tool for Industrial Designer , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 9 (2023): Applied Sciences and Technology
Issa M. Aziz, Raad N. Salih, Mohammed K. Jaqsi, Synthesizing and characterization of Lead Halide Perovskite Nanocrystals solar cells from reused car batteries , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 10 (2023): Applied Sciences and Technology
M.C. Mayra Patricia Osuna, Dr. Jesús Alberto Peinado Guevara, M.C. Marcos Antonio Garcia Galvez, Dra. Lizbeth Beltrán Lugo, Dr. Miguel Angel Montoya Leyva, Social perception of the effects of high manganese concentrations in drinking water in households in the municipality of Guasave, Sinaloa, Mexico. , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 10 (2023): Applied Sciences and Technology
Dwi Yuliaji, Roy Waluyo, Alimudin, A. H. Hendrawan, Hawa Bt Hishamuddin, Mulya Juarsa, Analysis and Testing of the Expansion Tank in the Rectangular Flow Channel FASSIP-04 Ver.0 , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 4 No. 6 (2022): Applied Sciences and Technology
Medi Hermanto Tinambunan, Djubir R.E. Kembuan, Vivi Peggie Rantung, Alfiansyah Hasibuan, Comparative Analysis of Prediction Results of Decision Support Systems Simple Additive Weighting Method with Preference Selection Index in Determining Scholarship Recipients , Technium: Romanian Journal of Applied Sciences and Technology: Vol. 16 (2023): Special issue

<< < 1 2 3 4 5 > >>

You may also start an advanced similarity search for this article.

Article Sidebar

Main Article Content

Abstract

Article Details

References

Similar Articles